25 Sep
2019
25 Sep
'19
12:26 p.m.
Hi NEST-Team,
To use the NEST-Simluator in an interactive installation, I would need to
1) have access to the spike in the network in realtime, and
2) send signals (spikes) to neurons in the simulation in realtime.
For 1), I could imagine writing the spike-times to a file and then reading that file while
the simulation is running. However, I currently don’t see an option for 2). Then I heard
that you are actually working on module that would enable realtime I/O-access. Is that the
case? And, if so, is there a timeline?
Best,
Benjamin
-- -- --
Dr. Benjamin Staude | Paul-Lincke-Ufer 7 | 10999 Berlin | benjamin.staude(a)gmail.com
25 Sep
25 Sep
4:30 p.m.
I suppose that Music is exactly what you are looking for.
You have your Nest program running along with another program.
Music enables you to make both communicate...
You might have a look at it :
https://www.nest-simulator.org/using-nest-with-music/
Sincerely,
Vincent.
Le 25/09/2019 à 06:26, Benjamin Staude a écrit :
> Hi NEST-Team,
>
> To use the NEST-Simluator in an interactive installation, I would need to
> 1) have access to the spike in the network in realtime, and
> 2) send signals (spikes) to neurons in the simulation in realtime.
>
> For 1), I could imagine writing the spike-times to a file and then reading that file
while the simulation is running. However, I currently don’t see an option for 2). Then I
heard that you are actually working on module that would enable realtime I/O-access. Is
that the case? And, if so, is there a timeline?
>
> Best,
> Benjamin
>
> -- -- --
> Dr. Benjamin Staude | Paul-Lincke-Ufer 7 | 10999 Berlin |
benjamin.staude(a)gmail.com
> _______________________________________________
> NEST Users mailing list -- users(a)nest-simulator.org
> To unsubscribe send an email to users-leave(a)nest-simulator.org
10 Oct
10 Oct
2:42 p.m.
Dear Benjamin,
long time no see. Welcome back :-)
We are indeed working on a generic I/O backend infrastructure for NEST.
The output part is mostly done and you can use it to write/stream out
the data or arbitrary recording devices to wherever you like.
Currently, there are recording backends for writing to ASCII and binary
files, for writing to the screen and for keeping data in memory. A more
experimental one is streaming spikes out using UDP sockets. Writing own
recording backends is pretty straightforward and there are quite some
examples.
The code will hopefully land in master very soon, but can be gotten from
https://github.com/jougs/nest-simulator/tree/nestio already now.
Due to a lack of concrete use cases, we don't have the input side
covered yet, but more and more users request this, so we might be
working on this in the not-so-far future.
Using MUSIC is another option, but of course requires external tools and
libraries on both sides of the connection. A colleague of mine is
currently looking into your request on that.
Best regards,
Jochen!
On 25.09.19 12:26, Benjamin Staude wrote:
Hi NEST-Team,
To use the NEST-Simluator in an interactive installation, I would need to
1) have access to the spike in the network in realtime, and
2) send signals (spikes) to neurons in the simulation in realtime.
For 1), I could imagine writing the spike-times to a file and then reading that file
while the simulation is running. However, I currently don’t see an option for 2). Then I
heard that you are actually working on module that would enable realtime I/O-access. Is
that the case? And, if so, is there a timeline?
Best,
Benjamin
-- -- --
Dr. Benjamin Staude | Paul-Lincke-Ufer 7 | 10999 Berlin |
benjamin.staude(a)gmail.com
_______________________________________________
NEST Users mailing list -- users(a)nest-simulator.org
To unsubscribe send an email to users-leave(a)nest-simulator.org
--
Dr. Jochen Martin Eppler
Phone: +49(2461)61-96653
----------------------------------
Simulation Laboratory Neuroscience
Jülich Supercomputing Centre
Institute for Advanced Simulation
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzender des Aufsichtsrats: MinDir Volker Rieke
Geschaeftsfuehrung: Prof. Dr.-Ing. Wolfgang Marquardt (Vorsitzender),
Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
1 Feb
1 Feb
12:12 p.m.
Hi Jochen,
After I have tackled some other issues, I have come back to my nest-io-issue and had a
look at the branch you mentioned (https://github.com/jougs/nest-simulator/tree/nestio
<https://github.com/jougs/nest-simulator/tree/nestio>). Could you point me to some
documentation/examples/relevant classes, so I can understand how to use it?
Thanks,
Benjamin
On 10. Oct 2019, at 14:42, Jochen Martin Eppler
<j.eppler(a)fz-juelich.de> wrote:
Dear Benjamin,
long time no see. Welcome back :-)
We are indeed working on a generic I/O backend infrastructure for NEST.
The output part is mostly done and you can use it to write/stream out
the data or arbitrary recording devices to wherever you like.
Currently, there are recording backends for writing to ASCII and binary
files, for writing to the screen and for keeping data in memory. A more
experimental one is streaming spikes out using UDP sockets. Writing own
recording backends is pretty straightforward and there are quite some
examples.
The code will hopefully land in master very soon, but can be gotten from
https://github.com/jougs/nest-simulator/tree/nestio already now.
Due to a lack of concrete use cases, we don't have the input side
covered yet, but more and more users request this, so we might be
working on this in the not-so-far future.
Using MUSIC is another option, but of course requires external tools and
libraries on both sides of the connection. A colleague of mine is
currently looking into your request on that.
Best regards,
Jochen!
On 25.09.19 12:26, Benjamin Staude wrote:
-- -- --
Dr. Benjamin Staude | Paul-Lincke-Ufer 7 | 10999 Berlin | benjamin.staude(a)gmail.com
Hi NEST-Team,
To use the NEST-Simluator in an interactive installation, I would need to
1) have access to the spike in the network in realtime, and
2) send signals (spikes) to neurons in the simulation in realtime.
For 1), I could imagine writing the spike-times to a file and then reading that file
while the simulation is running. However, I currently don’t see an option for 2). Then I
heard that you are actually working on module that would enable realtime I/O-access. Is
that the case? And, if so, is there a timeline?
Best,
Benjamin
-- -- --
Dr. Benjamin Staude | Paul-Lincke-Ufer 7 | 10999 Berlin |
benjamin.staude(a)gmail.com
_______________________________________________
NEST Users mailing list -- users(a)nest-simulator.org
To unsubscribe send an email to users-leave(a)nest-simulator.org
--
Dr. Jochen Martin Eppler
Phone: +49(2461)61-96653
----------------------------------
Simulation Laboratory Neuroscience
Jülich Supercomputing Centre
Institute for Advanced Simulation
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzender des Aufsichtsrats: MinDir Volker Rieke
Geschaeftsfuehrung: Prof. Dr.-Ing. Wolfgang Marquardt (Vorsitzender),
Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
_______________________________________________
NEST Users mailing list -- users(a)nest-simulator.org
To unsubscribe send an email to users-leave(a)nest-simulator.org
4 Feb
4 Feb
10:59 a.m.
Dear Benjamin,
Meanwhile, the branch you are mentioning has been merged into nest-3,
which has been merged to master just yesterday evening :-)
The user level documentation for the new recording backend feature can
be found here:
https://nest-simulator.readthedocs.io/en/latest/guides/recording_from_simul…
The developer documentation is contained mainly in the Doxygen comments
in nestkernel/recording_backend.h. If you want to implement your own
recording backend, the existing ones are probably the best stating
point: nestkernel/recording_backend_{ascii,screen,memory}.{h,cpp}.
Please note that both the backends and their documentation was developed
in a very restricted environment until now, so I'd be really happy if
you could provide us with feedback about your experiences or suggestions
on how to improve.
Cheers,
Jochen!
On 01.02.20 12:12, Benjamin Staude wrote:
Hi Jochen,
After I have tackled some other issues, I have come back to my
nest-io-issue and had a look at the branch you mentioned
(https://github.com/jougs/nest-simulator/tree/nestio). Could you point
me to some documentation/examples/relevant classes, so I can understand
how to use it?
Thanks,
Benjamin
--
Dr. Jochen Martin Eppler
Phone: +49(2461)61-96653
----------------------------------
Simulation Laboratory Neuroscience
Jülich Supercomputing Centre
Institute for Advanced Simulation
On 10. Oct 2019, at 14:42, Jochen Martin Eppler
<j.eppler(a)fz-juelich.de <mailto:j.eppler@fz-juelich.de>> wrote:
Dear Benjamin,
long time no see. Welcome back :-)
We are indeed working on a generic I/O backend infrastructure for NEST.
The output part is mostly done and you can use it to write/stream out
the data or arbitrary recording devices to wherever you like.
Currently, there are recording backends for writing to ASCII and binary
files, for writing to the screen and for keeping data in memory. A more
experimental one is streaming spikes out using UDP sockets. Writing own
recording backends is pretty straightforward and there are quite some
examples.
The code will hopefully land in master very soon, but can be gotten from
https://github.com/jougs/nest-simulator/tree/nestio already now.
Due to a lack of concrete use cases, we don't have the input side
covered yet, but more and more users request this, so we might be
working on this in the not-so-far future.
Using MUSIC is another option, but of course requires external tools and
libraries on both sides of the connection. A colleague of mine is
currently looking into your request on that.
Best regards,
Jochen!
On 25.09.19 12:26, Benjamin Staude wrote:
-- -- --
Dr. Benjamin Staude | Paul-Lincke-Ufer 7 | 10999 Berlin |
benjamin.staude(a)gmail.com <mailto:benjamin.staude@gmail.com>
Hi NEST-Team,
To use the NEST-Simluator in an interactive installation, I would need to
1) have access to the spike in the network in realtime, and
2) send signals (spikes) to neurons in the simulation in realtime.
For 1), I could imagine writing the spike-times to a file and then
reading that file while the simulation is running. However, I
currently don’t see an option for 2). Then I heard that you are
actually working on module that would enable realtime I/O-access. Is
that the case? And, if so, is there a timeline?
Best,
Benjamin
-- -- --
Dr. Benjamin Staude | Paul-Lincke-Ufer 7 | 10999 Berlin |
benjamin.staude(a)gmail.com <mailto:benjamin.staude@gmail.com>
_______________________________________________
NEST Users mailing list -- users(a)nest-simulator.org
<mailto:users@nest-simulator.org>
To unsubscribe send an email to users-leave(a)nest-simulator.org
<mailto:users-leave@nest-simulator.org>
--
Dr. Jochen Martin Eppler
Phone: +49(2461)61-96653
----------------------------------
Simulation Laboratory Neuroscience
Jülich Supercomputing Centre
Institute for Advanced Simulation
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzender des Aufsichtsrats: MinDir Volker Rieke
Geschaeftsfuehrung: Prof. Dr.-Ing. Wolfgang Marquardt (Vorsitzender),
Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
_______________________________________________
NEST Users mailing list -- users(a)nest-simulator.org
<mailto:users@nest-simulator.org>
To unsubscribe send an email to users-leave(a)nest-simulator.org
<mailto:users-leave@nest-simulator.org>
1782
days inactive
1914
days old
4 comments
3 participants
participants (3)
-
Benjamin Staude -
Jochen Martin Eppler -
Vincent Page